FINS

Josh Kerr Snow Leopard 5.0 (Med.)Thruster (Futures compat.)

by 3DFINS
Save $43.00
$143.00
$100.00

Josh Kerr 5.0 Snow Leopard

This medium sized template combined with Dimples makes this fin the ultimate high performance all-rounder: Josh Kerr rode these at pumping Snapper rocks(Quiky Pro) to the insanely intense waves at the Box (Margaret River Pro) and just about anything that needs a fin to Harness more power and delivering extra drive. ξEffective for all styles of surfing in just about any conditions. The Dimples improve the foils performance with a the flat inner face allowing for more control at extreme speeds.

Artist Hans Bruechle designed graphics with 3DFINS unique embedded graphic process takes Fin Art to the next level.

Carbon Fiber base/Fibreglass/Hexcore Construction (Futures base compatible)

Surfer Size:ξ60 - 85kg (132-187lb)

Fin Height:ξ4.55"(115.57mm)

Base:ξ4.37" (111mm)

Rake:ξ32.8 degrees

Best Board: Modern High Performance

FASTLIGHT 7.0 (larg) Thruster (FCS compatible)

by 3DFINS
Save $39.00
$130.00
$91.00

7.0 FASTLIGHT Thruster

The NEW 7.0ξThruster FASTLIGHTξfeaturing Dimple Technology. Our new FASTLIGHTξglass layup is Lighter with a smoother flex pattern.ξξThe 7.0 template is Larger template similar to the MF or AM2 outline Combined with 3DFINS Dimple technology suits larger more powerful surfers.
A great fin for Powerful drawn out turns, Fast off the bottom with plenty of fin for smooth transitions between turns on open faces. The smaller rear fin free's the fins up enough to give these a radical edge when required. 3DFINS unique embedded graphic takes Fin Art to the next level.

Fibreglass/Hexcore Construction (FCS compatible base)

Surfer Size:ξ75kg up ( 165lb) or guys who like to push hard onξthe rail.

Side fins:ξHeight:ξ4.75" (120.65mm)ξBase:ξ4.65" (118.11mm)

Center Fin:ξHeight:ξ4.49"(114.05mm)ξBase:ξ4.63" (117.06mm)

Best Board: Modern High Performance

Best for Waves: Point Breaks, Long

Surfboard Fins - FASTLIGHT 7" Hexcore Single Fin Save $26.40

FASTLIGHT 7" Hexcore Single fin

by 3DFINS
Save $26.40
$88.00
$61.60

7.0 FASTLIGHT Single Fin

The new FASTLIGHT 7" single fin maintains a classic template with soft seductive curves. As a slightly larger model, it allows for more fin in the water, which accommodates for bigger boards bigger guys and bigger turns. The addition of dimples reduces the drag while increasing drive for maximum performance.

Fits standard Single fin box.

Size Surfer:ξAll
Fin Height:ξ177mm (7 inches)

Best Board: Longboard, Cruiser or SUP

ξ

MOONRAKERR XCS Lite XS (Futures Compat.)

by 3DFINS
Sold out
$66.00
$46.00

The XCS LITE XS is the grommet dream. It's super fast, super responsive and super fun. Perfect to add a bit more speed, power and control to your turns.

They're also super smooth through transitions.ξ The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top.ξ Suitable for the majority of conditions, with the new bright colors they look insane in and out of the water.

Optimum weight ranges: 45-64kg (99-143lb)

Base:ξ4.26" / 108mm

Height:ξ4.22" / 107mm
Area:ξ13.03"Î_ / 8405mmÎ_
Sweep:ξ32.0Îç
Foil:ξIFT

MOONRAKERR XCS Lite Quad (FCS compat.)

by 3DFINS
Sold out
$80.00
$56.00

MOONRAKERR XCS Lite Quad

These Quads are super fun amazingly tough and versatile. Quads like flex and these have a super lively flex. Adding dimple technology to a quad set up adds even more drive, increases speed down the line and reducing tracking. A great value set of Quads for all levels of surfing.

Surfer Size: 60kg - 90kg

The Twin Tab system is fully compatible with FCS fin boxes.

 

Aero Composite Construction: Nylon/Glass fiber composite (FCS compatible)

Front Quads:
Base: 4.26" / 108mm Height: 4.22" / 107mm Area: 13.03"/ 8405mm Sweep: 32.3 Foil: IFT

 

Rear Quads:  Base: 4.37" / 110mm Height: 4.55" / 115mm Area:14.76"/ 9525mm Sweep: 32.0 Foil: IFT

Best Board: High Performance short board, Fun Boards.

Best for Waves: Great for Small fast surf. 

MOONRAKERR XCS Lite 7.0 (Futures base compat.)

by 3DFINS
Sold out
$66.00
$46.00

MOONRAKERR XCS Lite 7.0ξ

ξThe XCS LITE 7.0 creates extra drive and speed for both heavier surfers and those that simply want more "fin" in the water when it counts. The extra speed generated by the dimples is really noticable straight after takeoff and through turns especially when surfing softer, slower waves.

They're also super smooth through transitions.ξ The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top.ξ Suitable for the majority of conditions great for smaller waves needing some extra drive.

Aero Composite Construction: Nylon/Glass fiber composite (Futures compatible)

Surfer size:ξ75kg+ (165lb+)

Base:ξ4.72" / 110mm

Height:ξ4.64" / 115mm
Sweep:ξ35.0Îç
Foil:ξIFT

Surfboard Fins - MOONRAKERR Sold out
$88.00
$61.00

MOONRAKERR

MOONRAKERR

by 3DFINS
Sold out
$88.00
$61.00

MOONRAKERR XCS Lite Quad

These Quads are super fun amazingly tough and versatile. Quads like flex and these have a super lively flex. Adding dimple technology to a quad set up adds even more drive, increases speed down the line and reducing tracking. A great value set of Quads for all levels of surfing.

Surfer Size: 60kg - 90kg

 

Front Quads:

Base: 4.26" / 108mm Height: 4.22" / 107mm Area: 13.03"/ 8405mm Sweep: 32.3 Foil: IFT

 

Rear Quads:                                                                                                                                 Base: 4.37" / 110mm Height: 4.55" / 115mm Area:14.76"/ 9525mm Sweep: 32.0 Foil: IFT

 

Best Board: High Performance short board, Fun Boards.

 

Best for Waves: Great for Small fast surf.

 

Surfboard Fins - Juicer 155 (6.25") Single Fin Sold out

Juicer 155 (6.25") Single Fin

by 3DFINS
Sold out
$88.00
$61.00

Juicer 155 (6.25") Single Fin

Juicer 155( 6 1/4") The Single fin Journey begins. This template has been proven over the ages, but with dimples it becomes brand new. The dialed-in foils with dimples on both faces allow for reduced drag down the line, incredible drive off the bottom and no dead spots so you have speed to burn off the top. Combined with the 4.0 sides this fin is perfect for your performance Board, Cruiser, SUP or Longboard.

Fits standard Single fin box

Size Surfer: All
Juicer Height:ξ155mm (6 1/4 inches)

Josh Kerr Yellow 6.0(Med.) Thruster (Futures compat.)

by 3DFINS
Sold out
$143.00
$100.00

Josh Kerr Yellowξ6.0 (Med.) Thruster.

This is one of the most popular templates ever made. With less rake, wide-base, this Dimpled template gives maximum drive, allowing for extreme turns at very high speeds. Sharp bottoms to vertical launches are made easy when you ride this fin. Give this a go in beachies with grunt or some slabs.

3DFINS unique embedded graphic process takes Fin Art to the next level.

Fibreglass/Hexcore Construction (Futures base compatible)

Surfer Size:60-85kg (132-187lb)

Side fins : Height: 4.56"(116.00mm)

Base: 4.34"(110.23mm)

Rake: 32 degrees

Center Fin:

Height: 4.40"(111.75mm)

Base: 4.29"(109mm)

Best board: Modern High perfomance

    Josh Kerr Yellow 6.0(Med.) Thruster (FCS compat.)

    by 3DFINS
    Sold out
    $143.00
    $100.00

    Josh Kerr Yellowξ6.0 (Med.) Thruster.

    This is one of the most popular templates ever made. With less rake, wide-base, this Dimpled template gives maximum drive, allowing for extreme turns at very high speeds. Sharp bottoms to vertical launches are made easy when you ride this fin. Give this a go in beachies with grunt or some slabs.

    3DFINS unique embedded graphic process takes Fin Art to the next level.

    Fibreglass/Hexcore Construction (FCS base compatible)

    Surfer Size:60-85kg (132-187lb)

    Side fins : Height: 4.56"(116.00mm)

    Base: 4.34" 110.23mm)

    Rake: 32 degrees

    Center Fin:

    Height: 4.40"(111.75mm)

    Base: 4.29"(109mm)

    Best board: Modern High perfomance

      Josh Kerr XCS Lite (Sml.) Thruster (FCS compat.)

      by 3DFINS
      Sold out
      $66.00
      $46.00

      Josh Kerr XCS Lite (Sml.) Thruster

      The XCS LITE XS is the grommet dream. It's super fast, super responsive and super fun. Perfect to add a bit more speed, power and control to your turns.

      They're also super smooth through transitions. The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top. Suitable for the majority of conditions, with the new bright colors they look insane in and out of the water.

      Areo Composite Construction: Nylon/Glass fiber ξ(FCS compatible)

      Surfer Size: 45-64kg (99-143lb)

      Base: 4.26" / 108mm

      Height: 4.22" / 107mm
      Area: 13.03"/ 8405mm
      Sweep: 32.0 degrees
      Foil: Inside Foil tech.

      ξ

      Josh Kerr Snow Leopard 5.0 Med.Thruster (FCS compat.)

      by 3DFINS
      Sold out
      $143.00
      $100.00

      Josh Kerr 5.0 Snow Leopard

      This medium sized template combined with Dimples makes this fin the ultimate high performance all-rounder: Josh Kerr rode these at pumping Snapper rocks(Quiky Pro) to the insanely intense waves at the Box (Margaret River Pro) and just about anything that needs a fin to Harness more power and delivering extra drive. ξEffective for all styles of surfing in just about any conditions. The Dimples improve the foils performance with a the flat inner face allowing for more control at extreme speeds.

      Artist Hans Bruechle designed graphics with 3DFINS unique embedded graphic process takes Fin Art to the next level.

      Carbon Fiber base/Fibreglass/Hexcore Construction (FCS base compatible)

      Surfer Size:ξ60 - 85kg (132-187lb)

      Fin Height:ξ4.55"(115.57mm)

      Base:ξ4.37" (111mm)

      Rake:ξ32.8 degrees

      Best Board: Modern High Performance

      Josh Kerr Pink 5.0 (Med.)Thruster (FCS compat.)

      by 3DFINS
      Sold out
      $143.00
      $100.00

      Josh Kerr 5.0ξPink

      This medium sized template combined with Dimples makes this fin the ultimate high performance all-rounder: Josh Kerr rode these at pumping Snapper rocks(Quiky Pro) to the insanely intense waves at the Box (Margaret River Pro) and just about anything that needs a fin to Harness more power and delivering extra drive. ξEffective for all styles of surfing in just about any conditions. The Dimples improve the foils performance with a the flat inner face allowing for more control at extreme speeds.

      Artist Hans Bruechle designed graphics with 3DFINS unique embedded graphic process takes Fin Art to the next level.

      Carbon Fiber base/Fibreglass/Hexcore Construction (FCS base compatible)

      Surfer Size:ξ60 - 85kg (132-187lb)

      Fin Height:ξ4.55"(115.57mm)

      Base:ξ4.37" (111mm)

      Rake:ξ32.8 degrees

      Best Board: Modern High Performance

      ξ

      Josh Kerr Monkeyboy 6.0 Med.Thruster (Futures compat.)

      by 3DFINS
      Save $43.00
      $143.00
      $100.00

      Josh Kerr Monkeyboy 6.0 (Med.) Thruster.

      ξThis is one of the most popular templates ever made. With less rake, wide-base, this Dimpled template gives maximum drive, allowing for extreme turns at very high speeds. Sharp bottoms to vertical launches are made easy when you ride this fin. Give this a go in beachies with grunt or some slabs.

      3DFINS unique embedded graphic process takes Fin Art to the next level.

      Fibreglass/Hexcore Construction (Futures base compatible)

      Surfer Size:60-85kg (132-187lb)

      Side fins : Height: 4.56"(116.00mm)

      Base: 4.34"’ǒ_(110.23mm)

      Rake: 32 degrees

      Center Fin:

      Height: 4.40"(111.75mm)

      Base: 4.29"(109mm)

      ξBest Board: Modern high performance

        ξJosh Kerr Darkside Carbon based 6.0 Lionhead Thruster.

        This is one of the most popular templates ever made and for the first time has

        a carbon base. This design combined with Dimples makes this a must have fin. The template has less rake, wide-base, giving maximum drive, amazing response and a ridiculous amount of speed. Hard powerful bottoms to vertical launches are made easy when you ride this fin. Give this a go in beachies with grunt or some slabs an thing that requires sharp power full turns. The Carbon base adds strength and stiffness to lower end of the fins while allowing the upper 3rd of the fin to flex. This is high performance flex pattern that anyone can get the benefits from. Artist Hans Bruechle designed graphics with 3DFINS unique embedded graphic process takes Fin Art to the next level.

        Carbon Fiber base/Fibreglass/Hexcore Construction (Futures base compatible).

        Side fins: Height: 4.56"(116.00mm)

        Base: 4.34" (110.23mm) Rake: 32 degrees

        Center Fin: Height: 4.40"(111.75mm) Base:4.29"(109mm)

        Josh Kerr Darkside Carbon based 6.0 Lionhead Thruster

        This is one of the most popular templates ever made and for the first time hasξa carbon base. ξ ξ ξ ξ ξ ξ ξThis design combined with Dimples makes this a must have fin. The template has less rake, wide-base, giving maximum drive, amazing response and a ridiculous amount of speed. Hard powerful bottoms to vertical launches are made easy when you ride this fin. Give this a go in beachies with grunt or some slabs an thing that requires sharp power full turns. The Carbon base adds strength and stiffness to lower end of the fins while allowing the upper 3rd of the fin to flex. This is high performance flex pattern that anyone can get the benefits from. Artist Hans Bruechle designed graphics with 3DFINS unique embedded graphic process takes Fin Art to the next level.

        Carbon Fiber base/Fibreglass/Hexcore Construction (FCS base compatible).

        Surfer Size: 65-85 kg

        Side fins: Height: 4.56"(116.00mm)

        Base: 4.34" (110.23mm) Rake: 32 degrees

        Center Fin: Height: 4.40"(111.75mm) Base:4.29"(109mm)

        Best Board: Modern High Performace, Fun Boards

        Josh Kerr Blue (Sml.) Quad (Futures compat.)

        by 3DFINS
        Sold out
        $176.00
        $123.00

        Josh Kerr Blue (Sml.) Quad.

        ξJosh has given these quads some serious testing, he rode these at massive TodoŠ—Ès Santos for his recent WSL Big wave comp. win. Some of the Worlds wildest chargers are riding these in some insane waves from WA hell slabs to heaving heavy barrels of Cloud break.

        This Quad has refined foils and added dimples turn this model into a super quad. The rear fins have dimples on both faces, reducing any extra drag and allowing for tighter radius turns. Best for barrels, long walls and anything you want to out-run. 3DFINS unique embedded graphic process takes Fin Art to the next level.

        Fibreglass/Hexcore Construction (Futures base compatible)

        Surfer Size:ξ65kg up (132lb)

        Front fins: Height: 4.55" (112.5mm)
        Base: 4.37" (109.5mm)

        Back Fins: Height: 3.79" (96.5mm)
        Base: 3.78" (96mm)

        Best Board: Modern High Performance, Tow boards, Large Guns.

        Surfboard Fins - Josh Kerr Blue (Sml.) Quad (FCS Compat.) Sold out

        Josh Kerr Blue (Sml.) Quad (FCS compat.)

        by 3DFINS
        Sold out
        $176.00
        $123.00

        Josh Kerr Blue (Sml.) Quad.

        ξJosh has given these quads some serious testing, he rode these at massive TodoŠ—Ès Santos for his recent WSL Big wave comp. win. Some of the Worlds wildest chargers are riding these in some insane waves from WA hell slabs to heaving heavy barrels of Cloud break.

        This Quad has refined foils and added dimples turn this model into a super quad. The rear fins have dimples on both faces, reducing any extra drag and allowing for tighter radius turns. Best for barrels, long walls and anything you want to out-run. 3DFINS unique embedded graphic process takes Fin Art to the next level.

        Fibreglass/Hexcore Construction (FCS base compatible)

        Surfer Size:ξ65kg up (132lb)

        Front fins: Height: 4.55" (112.5mm)
        Base: 4.37" (109.5mm)

        Back Fins: Height: 3.79" (96.5mm)
        Base: 3.78" (96mm)

        Best Board: Modern High Performance, Tow boards, Large Guns.

        Josh Kerr Darkside 5.0 Wise Owl Carbon based

        This medium sized template combined with Dimples and Carbon base makes this fin the ultimate high performance all-rounder: Josh Kerr rode these at pumping Snapper rocks(Quiky Pro) to the insanely intense waves at the Box (Margaret River Pro) and just about anything that needs a fin to Harness more power and delivering extra drive. The Carbon base adds strength and stiffness to lower end of the fins while allowing the upper 3rd of the fin to flex. This is high performance flex pattern that anyone can get the benefits from. Effective for all styles of surfing in just about any conditions. The Dimples improve the foils performance, Carbon base with the flat inner face allowing for more control at extreme speeds.

        Artist Hans Bruechle designed graphics with 3DFINS unique embedded graphic process takes Fin Art to the next level.

        Carbon Fiber base/Fibreglass/Hexcore Construction(FCS base compatible)

        Surfer Size:ξ60 - 85kg (132-187lb)

        Fin Height:ξ4.55"(115.57mm)

        Base:ξ4.37" (111mm)

        Rake:ξ32.8 degrees

        Best Board: Modern High Performance

        ξ

        Josh Kerr Darkside Carbon based 4.0 BigMouth

        The 4.0 with Carbon base is the a super high performance for Groms and anyone needing a smaller template without loosing drive. The Carbon base adds strength and stiffness to lower end of the fins while allowing the upper 3rd of the fin to flex. This is high performance flex pattern will harness all the power you can load into these fins. This allows the fins to be ridden in more powerful waves and is great for bigger surfers wanting some fun in smaller waves. The smaller template is also great for the girls wanting some extra speed and release. Artist Hans Bruechle designed graphics with 3DFINS unique embedded graphic process takes Fin Art to the next level.

        Carbon Fiber base/Fibreglass/Hexcore Construction.ξ(FCSξbase compatible)

        Surfer Size: 40-60kg ( 121-165 lb) or if you want loose and fast fun.

        Fin Height: 4.42" (112.27mm)

        Base: 4.29"(108.97mm)

        Rake: 32.4 degrees

        Best Board: High Performance short board

        Josh Kerr Darkside Carbon based 4.0 BigMouth

        The 4.0 with Carbon base is the a super high performance for Groms and anyone needing a smaller template without loosing drive. The Carbon base adds strength and stiffness to lower end of the fins while allowing the upper 3rd of the fin to flex. This is high performance flex pattern will harness all the power you can load into these fins. This allows the fins to be ridden in more powerful waves and is great for bigger surfers wanting some fun in smaller waves. The smaller template is also great for the girls wanting some extra speed and release. Artist Hans Bruechle designed graphics with 3DFINS unique embedded graphic process takes Fin Art to the next level.

        Carbon Fiber base/Fibreglass/Hexcore Construction.ξ(Futures base compatible)

        Surfer Size: 40-60kg ( 121-165 lb) or if you want loose and fast fun.

        Fin Height: 4.42" (112.27mm)

        Base: 4.29"(108.97mm)

        Rake: 32.4 degrees

        Best Board: High Performance short board

        FASTLIGHT Hexcore 7.0 (larg) Thruster (Futures compatible)

        by 3DFINS
        Save $39.00
        $130.00
        $91.00

        7.0 FASTLIGHT Thruster

        The NEW 7.0ξThruster FASTLIGHTξfeaturing Dimple Technology. Our new FASTLIGHTξglass layup is Lighter with a smoother flex pattern.ξξThe 7.0 template is Larger template similar to the MF or AM2 outline Combined with 3DFINS Dimple technology suits larger more powerful surfers.
        A great fin for Powerful drawn out turns, Fast off the bottom with plenty of fin for smooth transitions between turns on open faces. The smaller rear fin free's the fins up enough to give these a radical edge when required. 3DFINS unique embedded graphic takes Fin Art to the next level.

        Fibreglass/Hexcore Construction (Futuresξcompatible base)

        Surfer Size:ξ75kg up ( 165lb) or guys who like to push hard onξthe rail.

        Side fins:ξHeight:ξ4.75" (120.65mm)ξBase:ξ4.65" (118.11mm)

        Center Fin:ξHeight:ξ4.49"(114.05mm)ξBase:ξ4.63" (117.06mm)

        Best Board: Modern High Performance

        Best for Waves: Point Breaks, Long

        Surfboard Fins - FASTLIGHT 6.25" Hexcore Single Fin Save $26.40

        FASTLIGHT 6.25" Hexcore Single fin

        by 3DFINS
        Save $26.40
        $88.00
        $61.60

        6.25 FASTLIGHT Single Fin

        This template has been proven over the years to be one of the most popular Single fin templates ever made, NOW with Dimples.
        The dialed-in foils with dimples on both faces allow for reduced drag down the line, incredible drive off the bottom and no dead spots so you have speed to burn off the top. Combined with the 4.0 sides this fin is perfect for your performance Board, Cruiser, SUP or Longboard. 3DFINS unique embedded graphic process takes Fin Art to the next level.
        Fits standard Single fin box.

        ξFibreglass/Hexcore Construction

        Size Surfer: All

        Fin Size: 6.25Š—?

        ξ

        FASTLIGHT 6.0 (Med) Thruster (Futures base compatible)

        by 3DFINS
        Save $39.00
        $130.00
        $91.00

        6.0 FASTLIGHT Thruster

        ξThe NEW 6.0ξThruster FASTLIGHTξfeaturing Dimple Technology. Our new FASTLIGHTξglass layup is Lighter with a smoother flex pattern.ξ

        The up right template of the 6.0, Smooth Flex pattern combined with Dimples gives this super responsive template some anger management. Still ready for Hard powerful bottoms to verticalξlaunches but allows for a refined version if handled correctly.
        Give this a go in beachies with grunt or walls that need quick thinking. 3DFINS unique embedded graphic process takes Fin Art
        to the next level.

        Fibreglass/Hexcore Construction (Futures base compatible)

        Surfer Size:ξ60-85kg (132-187lb)
        Side fins:ξHeight: 4.56"(116.00mm) Base: 4.34" (110.23mm) Rake: 32 degrees.
        Center Fin: Height:ξ4.40"(111.75mm) Base:4.29"(109mm)